Graphics - Design - Consulting - Computers - Film
Another prop replica project. We recreated the reflective “Paramedic” decals as used on the fire helmets on the “Emergency” TV show. These are printed on reflective material and are quite striking at night when light hits them. Accurate 2.5″ circle. We currently have a new print run available for sale. $15 a set.
This is a variation of the vintage look ambulance sticker that we did for a vehicle. This version of the sticker is printed in reverse on clear material and over-coated with white and black inks to the sticker is applied on the INSIDE of the glass. The image is visible through the adhesive layer and [...]
We were contracted to recreate some vintage drag race stickers to be used in the restoration of a vintage car. The original stickers were long gone, and all we had to work from was vintage photographs.
Custom Bumper Sticker project. Customer supplied artwork.
Design studies for proposed die-cast vehicle graphics. Each side of the vehicle was done with a different set of graphics allowing for 4 different variations on 2 physical vehicles. Full color, contour cut, with metallic gold and metallic silver accents.
Reproduction 8-track labels. Prop labels. Self adhesive, full color.
Rural mailbox wrap. Printed on exterior grade vinyl with a scratchguard coating. Both sides done with reversed logos so image is oriented properly on both sides.
These tabs were created as validation stickers for movie prop license plates. These are NOT legal for road use, and do not match any specific state tabs. These were created from scratch using movie still photos for reference. These were designed to accurately match the validation tabs used on the “Bluesmobile” in the first “Blues [...]
This was created as a prop for a vintage vehicle. A custom “permit” was designed incorporating a state seal and custom text. This was designed to look as if it could have been a permit used when the vehicle was in service. This was printed in full color on engineer grade reflective material.* The red [...]
This is a set of 1/18 scale AZ department of Public Safety Logos that was done as a materials test. These logos were created completely from scratch, and are printed in full color on an engineer grade reflective material. They were drawn to scale using scaled measurements from photos of a full size DPS cruiser.
Copyright © 2012 Liquid Reality Studios, LLC · Log in